News

In daily work, the role of PCB splitter is self-evident. So how should we pay attention to and avoid safety problems during use? Should you do maintenance work during non-working hours? Before turn...

1: The cutting speed is 1s/1, which is controlled by a foot-operated pneumatic switch. 2: The knife group is passively started, and the cutting line and position can be safely controlled; the cutti...

1) Do not touch electrical equipment with wet hands. 2) During operation, if you need to clean up the surrounding area of ​​the board loading machine, please ensure safety. 3) During operation, no ...

The slitting machine is a very important equipment. We often encounter the situation of the slitting machine running. So what are the general reasons for the slitting machine running? The slitting ...

Each machine has a different operation process, and each board splitter has different functions. Just like a piece of chocolate, each style has a different taste, design and style. To meet the pers...

The new automatic cutting equipment is controlled by software programs and terminal displays to form a complete PCB cutting system. The equipment can realize stress-free slitting operations of PCBs...

1. After the knife-type separator is powered on and ventilated, step on the foot switch. 2. When pressing the upper knife, release the hand slide valve, and then release the foot switch to stop the...

One: Make sure that the parts on the circuit board do not touch the body. The height of the parts on the circuit board should not exceed the range of this figure. Two: Upper guide knife position ad...

With the rapid development of industrial automation, fully automatic sub-boards are increasingly used in the electronics manufacturing industry. However, just as robots cannot completely replace hu...

Regarding the operation of walking knife type splitter, there are many people who have not used it and feel at a loss. In fact, as long as they actually use the operation, they will be familiar wit...

1. The PCB splitter starts the motor and then rotates. If the gap between the electromagnetic switch core and the push rod push rod is too large, the one-way clutch will slip and the flywheel ring ...

1. Before dividing the single board, please confirm whether the single board program edited by the engineer is correct. When the engineer edits or calls the previously used program, he must first p...